Measuring your windows for custom made window coverings correctly may seem like a daunting task, but with our detailed How to Measure page you can have confidence to measure your windows like an expert. Since the blinds are made to measure, take your time when measuring your windows, and do not hesitate to consult one of our window covering specialists if you have any questions.

> Use a metal measuring tape to take your measurements
> Measurements are in inches and should be taken to the 1/8″
> We recommend measuring your windows twice to avoid any errors
> Indicate which measurement is the Width and which is the Height

When deciding between an Inside or Outside mount, consider the depth of your window frame. You need a minimum of 2" to install zebra blinds inside the window frame. When choosing your mount style, look at your windows to determine if there are any components that may affect installation such as frame mouldings, door handles/locks, and window cranks that could impede the operation or damage your blinds. If you have older windows that are not level, outside mount would be the best choice as your blinds may not hang straight if the window aren't level.

Have questions? We’re here to help
sales@zebra-blinds.ca
(888) 637-3299

> Provides a clean look, keeps shades flush with your walls for an aesthetically pleasing design

> The most popular type of mount ordered for zebra blinds and roller shades. Mounted to the top of the window frame

> Allows for additional decorative curtains to be added to the wall surrounding the window

> Mount the blinds to the wall or ceiling to cover the entire window and surrounding moulding

> Are ideally suited for spaces needing full room darkening as outside mounted shades are most effective at blocking all light

> Recommended for unusually shaped windows such as triangular windows or windows with minimal mounting depth where inside mount is not possible

> Measure the width and height of the inside of your window frame in three places - Top, middle and bottom. Take the smallest of the 3 measurements for both the width and height and measure to the nearest 1/8", rounding down when possible

> When measuring, clearly indicate the width and height (W x H) to avoid accidentally reversing measurements. Once you've noted the first set of measurements, it's recommended to measure a second time to avoid any errors. Fees may apply to cut down the blind should it not fit

> Be sure to provide the exact dimensions of your window frame without any deductions. The manufacturer will make the necessary deductions to ensure a perfect fit. The cassette will be 1/8" less than the ordered width and the fabric will be approximately 1 1/4" less than the ordered width

> Measure the top of the window frame from one end of the frame or moulding to the other. It is recommend for outside mounts to add 2-4" extra to the width to ensure the entire window and moulding is fully covered

> When measuring for outside mount, a good tip to keep in mind is that you want to provide the dimensions of the entire space you want to cover with finished window covering, including the headrail cover

> The headrail will be made to the exact width measurement provided and the fabric will be approximately 1 1/2" less than the finished width.

> Take note of any for knobs or handles that may get in the way or damage your blind. Spacers are available to extend the blind further out should there be something obstructing the blind

> Zebra Blinds come installed within an aluminum cassette
> The ordered width will be the cassette dimensions
> The fabric will be 1" less then the cassette to accommodate the lift control mechanism
> The dimensions provided for blind height should reflect the total height that is to be covered from top of the cassette
to the bottom bar when the blind is in its lowest position